The Complete Error Code in Windows Blue Screen of Death (part1)

The Complete Error Code in Windows Blue Screen of Death (part1)

forever2sky Computer skills

1 0 × 00000001 Incorrect function.
2 0 × 00000002 system can not find the specified file .
3 0 × 00000003 system can not find the specified path .
4 0 × 00000004 The system can not open the file.
5 0 × 00000005 Access is denied.
6 0 × 00000006 invalid code.
7 0 × 00000007 storage control block has been destroyed.
8 0 × 00000008 storage space, unable to process this command.
9 0 × 00000009 storage control block address is invalid.
10 0 × 0000000A environment is incorrect.
11 0 × 0000000B error trying to load a program format.
12 0 × 0000000C access code error.
13 0 × 0000000D data errors.
14 0 × 0000000E storage space is not sufficient to complete this operation.
15 0 × 0000000F system can not find the specified disk drive.
16 0 × 00000010 can not remove directory.
17 0 × 00000011 The system can not move files to other disk drive.
18 0 × 00000012 does not have any files.
19 0 × 00000013 storage media is write protected.
20 0 × 00000014 system can not find the specified device.
21 0  × 00000015 device is not ready.
22 0 × 00000016 device does not recognize command.
23 0 × 00000017 Data error (cyclicredundancycheck)
24 0 × 00000018 error of the length of the program issued a command.
25 0 × 00000019 disk drives in the disk can not find the support given sector or track.
26 0 × 0000001A specified disk or disks can not access.
27 0 × 0000001B disk drive can not find the requested sector.
28 0 × 0000001C printer is not paper.
29  0 × 0000001D system can not write to the specified disk drive.
30 0 × 0000001E system can not read the specified device.
31 0  × 0000001F connected to the system, a device does not.
32 0  × 00000020Theprocesscannotaccessthefilebecauseitisbeingusedbyanotherprocess.
33 0  × 00000021 part of a file is locked, it can not access.
34 0  × 00000022 disk of disk drive  is not correct. Please% 2 (VolumeSerialNumber:% 3) into the disk drive% 1.
36 0  × 00000024 open too many file-sharing.
38 0 × 00000026 to reach end of file.
39 0 × 00000027 disk is full.
50 0 × 00000032 does not support this network requirements.
51 0  × 00000033 remote computer is not used.
52 0  × 00000034 network name duplication.
53 0 × 00000035 The network path was not found.
54 0 × 00000036 network is busy.
55 0 × 00000037Thespecifiednetworkresourceordeviceisnolongeravailable.
56 0 × 00000038ThenetworkBIOScommandlimithasbeenreached.
57 0 × 00000039 network adapter problems.
58 0 × 0000003A specified server can not perform the requested operation.
59 0 × 0000003B network unexpected error occurred.
60 0 × 0000003C remote adapter is not compatible.
61 0 × 0000003D printer queue is full.
62 0 × 0000003E server storage space can not wait to print the file.
63 0 × 0000003F waiting to print the file has been deleted.
64 0 × 00000040 The specified network name can not be used.
65 0 × 00000041 Access is denied network.
66 0 × 00000042 The network resource type error.
67 0 × 00000043 network name not found.
68 0 × 00000044 more than the name of the regional computer network adapter limitation.
69 0 × 00000045 operational phase than network BIOS limit.
70 0 × 00000046 remote server has been suspended or are in the beginning.
71 0 × 00000047 as reached the maximum number online at this time is no longer online to this remote computer.
72 0 × 00000048 The specified printer or disk device has been suspended effect.
80 0 × 00000050 file already exists.
82 0 × 00000052 Can not create directory or file.
83 0 × 00000053INT24 failure
84 0 × 00000054 to process this request can not be used for storage.
85 0 × 00000055 local device name is already in use.
86  0 × 00000056 The specified network password is incorrect.
87 0 × 00000057 parameter is incorrect.
88 0 × 00000058 network data write error.
89 0 × 00000059 The system can not perform other trip.
100 0 × 00000064 Can not create another system semaphore.
101 0 × 00000065 belonging to other stroke-specific semaphore.
102 0 × 00000066semaphore been set, but can not be closed.
103 0 × 00000067 can not be specified semaphore.
104 0 × 00000068 at interrupt time can not require specific semaphore.
104 0 × 00000068 at interrupt time can not require specific semaphore.
105 0 × 00000069 previous ownership of this semaphore has ended.
106 0 × 0000006A Please insert the disk% 1.
107 0 × 0000006B because the alternative has not yet inserted the disk, so the program has stopped.
108 0 × 0000006C disk is in use or locked.
109 0 × 0000006DPipe has been suspended.
110 0 × 0000006E system can not open the specified device or file.
111 0 × 0000006F file name is too long.
112 0 × 00000070 disk space.
113 0 × 00000071 internal file identifier is not available.
114 0 × 00000072 The target internal file identifier is incorrect.
117 0 × 00000075 by the application of the IOCTL call is not correct.
118 0 × 00000076 written verification parameter value is not correct.
1190 × 00000077 system does not support the requested instruction.
120 0 × 00000078 This function is only valid in Win32 mode.
121 0  × 00000079semaphore timeout period.
122 0 × 0000007A The data area passed to a system call is too small.
1230 × 0000007B The filename, directory name or volume label syntax errors storage.
124 0 × 0000007C system call level is not correct.
125 0 × 0000007D not set the disk label.
126 0 × 0000007E specified module could not.
127 0 × 0000007F find the specified procedure.
128  0 × 00000080 is not available to wait for child process.
129 0  × 00000081% 1 of this application can not Win32 mode.
130 0X00000082Attempt to use a file handle to an open disk partition for an operation other than raw disk I / O.
131 0 × 00000083 attempt to move the file pointer before the beginning of the file.
132 0 × 00000084 can not be in the specified device or file, set the file pointer.
133 0 × 00000085JOIN or SUBST command can be used with embedded advance over the disk drive.
134 0 × 00000086 attempt to combine the disk drive, use a JOIN or SUBST command.
135 0 × 00000087 been trying to replace the disk drive, use a JOIN or SUBST command.
136 0 × 00000088 system tries to delete is not linked off the link between disk drives.
137 0 × 00000089 is not replaced before the system tries to remove the disk drive replacement relationship.
138 0 × 0000008A system tries to combine the disk drive has the combination of disk drive directory.
139 0 × 0000008B system tries to replace the disk drive has been replaced over the disk drive's directory.
140 0 × 0000008C system tries to replace the disk drive has been replaced over the disk drive's directory.
141 0 × 000000 system tries to disk drive SUBST been integrated into the disk drive directory.
142 0 × 0000008E system at the moment can not perform a JOIN or SUBST.
143 0 × 0000008F system can not be combined with or replace the disk drive disk drives under the same directory.
144 0 × 00000090 This directory is not a subdirectory of the root directory.
145 0 × 00000091 data directory there.
146 0 × 00000092 The specified path has been replaced too.
147 0 × 00000093 insufficient resources to deal with this directive.
148 0 × 00000094 The specified path can not be used at this time.
148 0 × 00000094 The specified path can not be used at this time.
149 0 × 00000095 attempt to combine or replace the disk drive directory, which has been replaced over the target.
150 0 × 00000096CONFIG.SYS file does not specify the system to track information, or tracking function is canceled.
151 0 × 00000097 The number of specified semaphore events DosMuxSemWait incorrect.
152 0 × 00000098DosMuxSemWait not implemented; set too many semaphore.
153 0 × 00000099DosMuxSemWait list is not correct.
154 0 × 0000009A you enter the storage media standard element length.
155 0 × 0000009B not create other threads.
156 0 × 0000009C receiver refused to accept the trip signal.
157 0 × 0000009D section has been discarded and can not be locked.
158 0 × 0000009E segment is already unlocked.
159 0 × 0000009F thread ID of the address is incorrect.
160 0 × 000000A0 argument string passed DosExecPgm is incorrect.
161 0  × 000000A1 specified path is incorrect.
162 0  × 000000A2 to wait for the signal processing.
164 0 × 000000A4 System can not create threads.
167 0 × 000000A7 locked file can not be part of the range.
170 0 × 000000AA the requested resource is in use.
173 0 × 000000AD cancel the range of the lock request is not obvious.
174 0 × 000000AE file system does not support the automatic change the lock type.
180 0 × 000000B4 system found an incorrect section number.
182 0 × 000000B6 operating system can not run% 1.
182 0 × 000000B6 operating system can not run% 1.
183 0 × 000000B7 file already exists, not create the same file.
186 0 × 000000BA error sending the banner.
187 0 × 000000BB not find the specified system flag.
188 0 × 000000BC operating system can not run% 1.
189 0 × 000000BD operating system can not run% 1.
190 0 × 000000BE operating system can not run% 1.
191 0 × 000000BF Win32 mode can not run% 1.
192 0 × 000000C0 operating system can not run% 1.
193 0 × 000000C1% 1 is not the right Win32 application.
194 0 × 000000C2 operating system can not run% 1.
195 0 × 000000C3 operating system can not run% 1.
196 0 × 000000C4 operating system can not run this application.
197 0 × 000000C5 operating system could not run this application.
198 0 × 000000C6 operating system can not run% 1.
199 0 × 000000C7 operating system can not run this application.
200  0 × 000000C8 program code segment can not be greater than or equal to 64KB.
2010 × 000000C9 operating system can not run% 1.
202 0 × 000000CA operating system can not run% 1.
203 0 × 000000CB system can not find the environment option entered. \ R
205 0 × 000000CD the command subdirectory, there is no trip signal vice handler.
206 0 × 000000CE file name or extension is too long.
207 0 × 000000CFring2 stack is in use.
208 0 × 000000D0 generic file name input element * or? Is not correct, or too many generic file name specified element.
209 0 × 000000D1 the transmitted signal is not correct.
210 0 × 000000D2 not set a signal handler.
212 0 × 000000D4 segment is locked and can not be reconfigured.
214 0 × 000000D6 attached to this program or dynamic link module dynamic link module too.
215 0 × 000000D7Can'tnestcallstoLoadModule.
230 0 × 000000E6Thepipestateisinvalid.
231 0  × 000000E7 all pipeinstances are busy.
232 0  × 000000E8Thepipeisbeingclosed.
233 0 × 000000E9Noprocessisontheotherendofthepipe.
234 0 × 000000EA have more information available.
240 0 × 000000F0 Session was canceled.
254 0 × 000000FE specified extended attribute name is invalid.
255 0 × 000000FF extended attributes are inconsistent.
259 0 × 00000103 no data available.
266 0 × 0000010A not CopyAPI.
267 0 × 0000010B directory name error.
275 0 × 00000113 extended attribute does not apply to the buffer.
276 0 × 00000114 in the plug-in extension on the file system properties file has been corrupted.
277 0 × 00000115 extended attribute table file is full.
278 0 × 00000116 specified extended attribute handle is invalid.
282 0 × 0000011A plug of this file system does not support extended attributes.
288 0 × 00000120 is not intended to release those who are called with mutex.
298 0 × 0000012Asemaphore send too many times.
299 0 × 0000012B completed only Read / WriteProcessMemory part of the requirements.
317 0 × 0000013D system can not find in the message file% 2 in number 0 × 0000% 1 of the message.
487 0 × 000001E7 trying to access invalid address.
534 0 × 00000216 Arithmetic result exceeded 32 bits.
535 0 × 00000217 channel the other end of a trip in the transfer of information.
536 0 × 00000218 waiting for their journey to the other side of the channel open.
994 0 × 000003E2 denied access to extended attributes.
995 0 × 000003E3 as a thread exit or application requirements, and abnormal termination of I / O operations.
996 0 × 000003E4 overlapped I / O event is not configured to notify the state.
997 0 × 000003E5 are dealing with overlapped I / O operations.
998 0 × 000003E6 Invalid access to memory location.
999 0 × 000003E7 perform inpage operation error.
1001 0 × 000003E9 Recursion too deep, stack overflow.
1002 0 × 000003EA window can not be used to send messages.
1003 0 × 000003EB unable to complete this function.
1004 0 × 000003EC flag is invalid.
1005 0 × 000003ED storage media contains no recognizable file system. Make sure to load the required system drivers, and the storag e media is not damaged.
1006 0 × 000003EE save the file, external media warning that the file has been opened already invalid.
1007 0 × 000003EF the requested operation can not be in full-screen mode.
1008 0 × 000003F0Anattemptwasmadetoreferenceatokenthatdoesnotexist.
1009 0 × 000003F1 configuration system registry database corrupt.
1010 0 × 000003F2 configuration system registry key is invalid.
1011 0  × 000003F3 can not open configuration system registry keys.
1012 0  × 000003F4 can not read the configuration of the system registry keys.
1013 0 × 000003F5 can not write to the configuration system registry keys.
1014 0 × 000003F6 system registry database, a file must use the records or other backup and restore. Has been restored successfully.
1015 0 × 000003F7 system registry corruption. One of the file corruption, or the file system image on memory content corruption, the file will be unrecoverable.
1016 0 × 000003F8 system log start the I / O operations an unrecoverable error. System registry could not read, write or update a file which contains the system

This address is http://www.computerites.com/computer-skills/2011/12/the-complete-error-code-in-windows-blue-screen-of-death-28.html

How to Fix the Problem of the Blue Screen of Death

How to Fix the Problem of the Blue Screen of Death

forever2sky Computer skills

1.0x0000000A: IRQL_NOT_LESS_OR_EQUAL

◆ Error analysis: The main problem is the driver, defective or incompatible hardware and software caused. From a technical point of view. That there is in the kernel mode level of process requests (IRQL) do not have permission to access the memory address accessed.

◇ Solution: Use the solution described above in 2,3,5,8,9 program try to exclude.

2,0 x00000012: TRAP_CAUSE_UNKNOWN

◆ Error analysis: If you encounter this error message, then it is unfortunate, should KeBudCheck analysis The result is an error for an unknown reason.

◇ Solution: Since Microsoft do not help, it depends on your own, please be careful when I recall this error occurs; the first time it happens, what you do on the system operation; what happens when the ongoing operation of these information to identify possible causes, so select the appropriate solutions to try to exclude.

3,0 x0000001A: MEMORY_MANAGEMENT

◆ Error analysis: This memory management error is often caused by hardware, such as: installation of new hardware, memory itself has problems.

◇ Solution: If you are there when Windows is installed, it may be because you computer where Windows is installed less than minimum memory and disk requirements.

4,0 x0000001E: KMODE_EXCEPTION_NOT_HANDLED

◆ Error analysis: Windows kernel checks to process an illegal or unknown instruction, the stop code is a general problem with the front 0x0000000A memory or similar causes.

◇ Solution: (1) Hardware Compatibility question: Please control mentioned earlier the latest hardware compatibility list to see if all hardware is included in the list. (2) problems of the device driver, system service or memory conflicts and interrupt conflict: If the blue screen message appears in the name of the driver, please try to install the Recovery Console mode or to disable or remove drivers, and disable all just installed the drivers and software. If the error occurs during system startup, please enter the safe mode, blue screen message will indicate in the file rename or delete. (3) If the error message clearly states that Win32K.sys: most likely caused by third-party remote control software, you need Recovery Console from the software services will be closed. (4) In the first reboot after installing Windows when: the maximum possible suspects, the system partition disk space or BIOS compatibility problem (5) If it is turned off when a piece of software: the software is the most likely to survive when defects in the design, upgrade or uninstall it.

5,0 x00000023: FAT_FILE_SYSTEM 0x00000024: NTFS_FILE_SYSTEM

◆ Error analysis: 0x00000023 usually occurs in the read and write FAT16 or FAT32 file system, system partition, which is due to 0x00000024 error NTFS.sys file (the driver's role is to allow file system to read and write using . (NTFS file system disk), which is likely to be two blue screen errors inherent in the physical disk damage, or interrupt request packet (IRP) damage caused. Other reasons include: too much hard disk fragmentation; file read write too often, and the data is very large or because of some disk mirroring software, or antivirus software caused.

◇ Solution: Step one: First, open a command prompt, run "Chkdsk / r" (note: not CHKDISK, feeling like this, but they refer to the content is not the same) command to check and repair disk errors, if the report there are bad sectors (Bad Track), please check with hard drive manufacturers provide tools for inspection and repair. Step two: Disable and then All the software even if the scanned documents, such as: anti-virus software, firewall, or backup tool Step 3: Right-click the C: \ winnt \ system32 \ drivers \ fastfat.sys file and select "Properties" to see if their version of the current system consistent with the Windows version (Note: If it is XP, it should be C: \ windows \ system32 \ drivers \ fastfat.sys) Step four: Install the latest motherboard drivers, especially IDE drive if your drive can beRemovable Storage also provides a driver, it is best to upgrade them to the latest version.

6,0 x00000027: RDR_FILE_SYSTEM

◆ Error analysis: the causes of this error is difficult to judge, but a problem with Windows memory management is likely to result in the shutdown code there.

◇ Solution: If the memory management reasons, usually to increase the memory will solve the problem. 7,0 x0000002EATA_BUS_ERROR

◆ Error analysis: system memory memory parity error, usually because of defective memory (including physical memory, two cache or memory card) when the device driver to access memory address does not exist causes such as addition, the hard disk is damaged by virus or other problems to occur this stop code.

◇ Solution: (1) Check for viruses (2) Use "chkdsk / r" command to check all the disk partitions (3) with Memtest86 memory testing software such as checking the memory (4) Check the hardware is installed correctly, such as: whether the firm, whether finger stains. 8,0 x00000035: NO_MORE_IRP_STACK_LOCATIONS

◆ error analysis: understood literally, when the driver should be a stack or some software problem. In fact, the real reason for this failure, when the driver should survive in this issue, there are quality problems or memory.

◇ Solution: Please use the earlier The conventional solution with drivers and memory-related programs for exclusion.

9,0 x0000003F: NO_MORE_SYSTEM_PTES

◆ Error analysis: a memory management system-related errors, such as: As a result of a large number of input / output operations, resulting in emergence of memory management Problem: Defective driver does not correctly use memory resources; an application (such as: backup software) is assigned such a large amount of kernel memory.

◇ Solution: Uninstall all the latest software installed (especially those that enhance the performance diskapplications and antivirus software) and drivers.

10,0 x00000044: MULTIPLE_IRP_COMPLIETE_REQUESTS

◆ Error analysis: usually caused by the hardware drivers.

◇ Solution: Uninstall recently installed the driver and this failure is rare, has been known , in the use of certain software company will appear, in which the culprit is Falstaff.sys file (author not afraid of legal action, Well, the company's Web site published)

11,0 x00000050: PAGE_FAULT_IN_NONPAGED + AREA

◆ Error analysis: a problemmemory (including physical memory, secondary cache memory), incompatible software (mainly remote control and antivirus software), the corrupted NTFS volume problem and the hardware (such as: PCI card itself is damaged), and this will cause this error.

◇ Solution: Use the solution described above with conventional memory, software, hardware, hard drives and other related programs to be ruled out. If the computer is installed in the maxdos (or a boot disk with maxdos) can also command mode, simply delete the C drive page file.

12,0 x00000051: REGISTRY_ERROR

◆ Error analysis: This stop code shows the registry or system configuration manager error, due to physical damage to the hard disk itself or file system problems, resulting in a reading registration documents of an input / output error.

◇ Solution: Use "chkdsk / r" to check and repair disk errors.

13,0 x00000058: FTDISK_INTERNAL_ERROR

◆ Error analysis: Description of the main drive in fault-tolerant set of error.?

◇ Solution: First, try to restart the computer to see if that fixes it, if not, try "Last Known Good Configuration" to solve.

14,0 x0000005E: CRITICAL_SERVICE_FAILED

◆ Error analysis: a very important system services due to start recognition.

◇ Solution: If the installed a new hardware with new, you can remove the hardware, and check whether it is through the online list is compatible with Windows 2K/XP, and then start the computer, or if the blue screen appears, use the "Last Known Good Configuration" to start Windows, or if this fails, it is recommended to repair the installation or reinstall.

15,0 x0000006F: SESSION3_INITIALIZATION-FAILED

◆ Error analysis: This error usually appears when Windows starts, usually by a faulty driver or corrupted system file caused.

◇ Solution: We recommend using the Windows installation CD to repair the system installation.

16,0 x00000076ROCESS_HAS_LOCKED_PAGES

◆ Error analysis: generally because a driver is a complete input / output operations, it did not properly release the memory occupied by run:regedt32, find [HKLM\SYSTEM\Currentcontrol set\control\session manager\memory management], at right dbw"TrackLockedPages", 1.'>

◇ Solution: First step: Click Start -> Run: regedt32, find the [HKLM \ SYSTEM \ Currentcontrol set \ control \ session manager \ memory management], in the right side of the new DWORD value "TrackLockedPages", a value of 1. so that Windows will re-appear in the wrong track to which driver is the problem. Step Two: If the blue screen appears again, then the error message becomes: STOP: 0x0000000CB (0xY, 0xY, 0xY, 0xY) DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS the fourth a "0xY" will appear as the problem driver's name, and then to update or delete the third step: to enter the registry, delete the added "TrackLockedPages".

17,0 x00000077: KERNEL_STACK_INPAGE_ERROR

◆ Error analysis: the need to use the kernel data is not in physical memory, virtual memory, or be found This error is often the disk in question, the corresponding erosion data corruption or virus.

◇ Solution: Use anti-virus software to scan the system; use "chkdsk / r" command to check and repair disk errors If not then use the disk tools to check the repair vendor.

18,0 x0000007A: KERNEL_DATA_INPAGE_ERROR

◆ Error analysis: This error is often the kernel virtual memory data can not be read into memory making. may be due to the virtual memory page file has bad clusters virus , disk controller error, memory problems.

◇ Solution: First, upgrade to the latest virus database with antivirus software killing the virus, if the information there 0xC000009C or 0xC000016A code, then that is the result of bad clusters, and the system disk detection tool can not automatically repair, this time to enter the "Recovery Console", with "chkdsk / r" command to manually repair.

19,0 x0000007B: INACESSIBLE_BOOT_DEVICE

◆ Error analysis: Windows during the boot process can not access the system partition or boot volume. general After replacing the motherboard in first start, mainly because the new motherboard and old motherboard's IDE controller uses a different chipset cause sometimes it may be a virus or hard disk damage caused.

◇ Solution: generally just use the installation CD-ROM to start the computer, and then perform a repair installation to solve the problem for the virus can use the DOS version of the killing of anti-virus software . If the hard disk itself a problem, please install it to another computer, and then Use "chkdsk / r" to check and repair disk errors. If the problem is the BIOS settings, BIOS settings IDE mode as long as you can.

20,0 x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

◆ Error analysis: The system process error, but Windows can not catch the error handler. Its causes are many, including: hardware compatibility problem driver or system service, or some software.

◇ Solution: Please use the "Event Viewer" to get more information from that source of the error. ( Oh, that does not seem to solve, it seems everyone here has to be self-reliant!)

21,0 x0000007F: UNEXPECTED_KERNEL_MOED_TRAP

◆ Error analysis: generally due to hardware problems (for example: memory) or some software caused sometimes overclocking will produce this error .

◇ Solution: use detection software (such as: Memtest86) Check the memory, if you were overclocking, please cancel the overclocking. the PCI hardware card slot pull down from the board, or replace the slot. In addition, some motherboards (eg: nForce2 board) during overclocking, South Bridge chips overheating can lead to blue screen, then increase the heat sink for the chip alone can often be an effective solution to the problem.

22,0 x00000080: NMI_HARDWARE_FAILURE

◆ Error analysis: there is usually caused by hardware. (blue screen appears have been plagued with hardware error)

◇ Solution: If you recently installed new hardware, remove it and try to replace the slot and install the latest drivers, if you upgrade the drivers, restored the original version; check whether there is memory pollution and damage to the finger; scan for viruses; run "chkdsk / r" to check and repair disk errors; check all the hardware card has been inserted firmly. If the above attempts have no effect, you have to find a professional computer repair company requests help.

23,0 x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED

◆ Error analysis: kernel-level application generates an error, but Windows error handler did not catch usually is a hardware compatibility error.

◇ Solution: Upgrade drivers or upgrade BIOS.

24, 0x0000009C: MACHINE_CHECK_EXCEPTION

◆ Error analysis: generally caused by hardware. generally because of overclocking or hardware problems (memory, CPU, bus, power supply).

◇ Solution: If you were overclocking, please lower the CPU frequency of the original, check the hardware.

25,0 x0000009DRIVER_POWER_STATE_FAILURE

◆ Error analysis: there is often associated with power relations, often in power-related operations, such as: shutdown, standby or off to sleep.

◇ Solution: reinstall the system, if not resolved, replace the power supply.

26,0 x000000A5 : ACPI_BIOS_ERROR ◆ Error analysis: usually because the motherboard BIOS does not fully support the ACPI specification.

◇ Solution: If there is no corresponding BIOS upgrade, you can install Windows 2K/XP, when the emergence of "press F6 if you need to install a third- party SCSI or RAID driver "prompt, press the F7 key, so that Windows will automatically prevent the installation of ACPI HAL, and install Standard PC HAL.

27,0 x000000B4: VIDEO_DRIVER_INIT_FAILURE

◆ Error analysis: This Stop message indicates that Windows could not start because the graphics driver, thus unable to enter the graphical interface, usually the problem is the graphics card or video card hardware conflict exists with (eg: with parallel or serial port conflicts).

◇ Solution: Safe Mode see if the problem is resolved, if possible, please upgrade to the latest  graphics driver, if not, it is likely that there is a conflict with the parallel port card, you need to safe mode press WIN + break key combination to open the "System Properties" in the Hardware -> Device Manager, find and double-click the connection print the LPT1 port option in the "Resources" tab to cancel the "Use automatic configuration" the check, then "Input / Output Range" and "03BC" to "0378".

28,0 x000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY

◆ error analysis: a driver attempts to write data to the read-only memory, resulting usually in the installation of a new driver, system service or upgrade the device firmware program.

◇ Solution: If the error message contains file name the driver or service, please use this information to the newly installed driver or software uninstall or disable.

29,0 x000000C2: BAD_POOL_CALLER

◆ Error analysis: a core layer of the process or driver incorrectly attempted to enter the memory operation. usually drive there is a software program or caused by BUG.

◇ Solution: Please refer to the conventional solutions described above related items excluded.

30,0 x000000CERIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS

◆ Error analysis: usually caused by faulty drivers or system services caused.

◇ Solution : Please refer to the conventional solutions described above related items excluded.

31,0 x000000D1RIVER_IRQL_NOT_LESS_OR_EQUAL

◆ Error analysis: usually caused by a driver is causing the problem (such as Logitech MouseWare 9.10 Logitech mouse driver version 9.24 and this will lead to failure) At the same time, defective memory, virtual memory, file damage, some software (such as multimedia software, antivirus software, backup software, DVD playback software) can also cause this error.

◇ Solution: Check the latest drivers to install or upgrade procedures (if blue screen appears "acpi.sys" and other similar file name can be very sure the problem is the driver), and software; test whether memory problems; into "Recovery Console", go to the virtual memory page file Pagefile.sys where the partition, execute "del pagefile.sys" command to delete the page file; and then in the page file partition implementation "chkdsk / r" command; into the Windows virtual memory after a reset, if encountered the blue screen in the Internet, and you precisely during the download and upload large amounts of data (such as: online games, BT download), then the network card driver is the problem, needed to upgrade its driver.

32,0 x000000EA: THREAD_STUCK_IN_DEVICE_DRIVER

◆ Error analysis: generally by the video card or graphics card caused by the driver.

◇ Solution: upgrade to the latest video card driver first, if not, you need to replace the video card test if the problem still occurs. 33,0 x000000ED: UNMOUNTABLE_BOOT_VOLUME

◆ Error analysis: generally caused due to a disk error, and sometimes also recommended Check the hard disk connection is bad, or not used in line with the hard drive transfer cable specifications, for example, still use the ATA-100 ATA-33 connection cable, low-speed hard drive does not matter, but the high-speed hard drive (supports ATA-66 and above)more stringent requirements, specifications, sometimes the connection does not cause the failure of these no way to boot, if after the repair, or often this error is likely to be hard drive failure can be predicted.

◇ Solution: Under normal circumstances, will restart solve the problem, no matter what are the implementation of recommendations "chkdsk / r" command to check the repair hard disk

34,0 x000000F2: HARDWAREINTERRUPT_STORM

◆ Error analysis: the kernel level error checking to the suspension system, such as: a device does not release the finished occupied interrupt. Usually this is caused by a defect of the driver.

◇ Solution: upgrade or uninstall the latest hardware drivers installed.

35,0 x00000135: UNABLE_TO_LOCATE_DLL

◆ Error analysis: generally indicates that a file is missing or corrupted, or is registered Table error.

◇ Solution: If a file is missing or damaged, usually in the blue screen will display the corresponding information in the file name, you can find other computers through the network or the appropriate file, and copy it to the system folder under the SYSTEM32 subfolder. If no file name, it is likely that the registry is damaged, please use the System Restore or a backup to restore the previous registry.

36,0 x0000021A: STATUS_SYSTEM_PROCESS_TERMINATED

◆ Error analysis: user-mode subsystem,such as Winlogon or the customer service run-time subsystem (CSRSS) is damaged, it can not guarantee security, system will not start sometimes, when the system administrator incorrectly modify the user account privileges, resulting in the system can not access files and folders .

◇ Solution: use the "Last Known Good Configuration", if invalid, use the installation CD to repair the installation.

37, STOP 0xC0000221 or STATUS_IMAGE_CHECKSUM_MISMATCH

◆ Error analysis: usually due to driver or system DLL file corruption caused. in general , the blue screen will appear in the file name. sys files 3. rename it, such as: XXXintelppm.sys 4. restart.

Tips
1. Important to regularly back up the registry files manually, to avoid system error, the failure to replace the backup file and have irreparable error.

2. Try to avoid non-normal shutdown, reducing the loss of important documents. Such as. VxD. DLL files, hard disk damage or loss of system boot files.

3. For ordinary users, as long as normal operation, there is no need to upgrade the video card, motherboard BIOS and drivers, to avoid the damage upgrade.

4. Regular checks to optimize system files, run the "System File Checker" checks and the versions for the file is missing proof. See the previous inspection procedures related presentations.

5. Reduce unwanted software installation, do not try to uninstall or manually delete the program to reduce illegal replace files and point to errors.

6. If it is not particularly large and its memory management program is very good, try to avoid a large program to run, if you find that when listening to MP3 Lara rustling sound, which can be determined that the failure was caused by the memory.

7. Regularly use antivirus software completely scans, cleans viruses.

8. Not some unfamiliar site, on the site with some pictures and some of the temptation of winning the news, do not click.

9.Periodically upgrade the operating system, software and drivers.

The complete error code in windows blue screen of death

The complete error code in windows blue screen of death (part2)

Ten Ultra Classic Philosophy of Life Storys

Ten Ultra Classic Philosophy of Life Storys

forever2sky Essays

1 In the past, there are two hungry people has gain a gift of the elderly: a fishing rod and a huge basket of live fish. Among them, one to a basket of fish, another person asked for a fishing rod, so they parted ways. Get the fish were put up in situ on the campfire to cook with firewood from a fish, he devoured, there is no product out of the meaty fish, suddenly, even the fish soup which he ate, and soon, he starved to death in the empty creel. Another person is carrying a fishing rod to go hungry, hard step by step walk to the beach, but when he saw not far from the patch of blue ocean, he covered the last bit of energy also finished, He can only helplessly with endless regret doing nothing human. There are two hungry people, they also received the gift of an elderly rod and a basket of fish. But they did not go our separate ways, but agreed to work together to find the sea, They only cook a fish every time they trek through remote, came to the beach, since then, the two began a day of fishing for a living, a few years later, they built a house, with their respective families, children have their own fishing boats built, and lived a happy and peaceful life.
Inspiration: only the immediate interests of a person, will eventually get the short-lived joy; a lofty goal, but we must face the reality of life. Only the ideal and reality combine, will it be possible to become a successful person. Sometimes, a simple truth, but enough to give meaningful life inspiration.
2One scholar Beijing exam the third time, living in a regular live store. Two days before exam he did three dreams, his first dream is the dream kind of cabbage on the wall, the second dream is a rainy day, he was wearing a bamboo hat umbrella, and the third dream is the dream with the beloved cousin lying naked together, but back to back. These three dreams seem profound meaning of the scholar quickly went the next day telling explain it. Telling of a, continuous thigh, said: "You still go home and you think, growing vegetables is not high on the wall futile it? Not bother wearing umbrella hats to play it? With cousin are lying on a bed naked out, but back to back, not the game is it? "scholar, frustrated, packed his bags ready to go home back to the shop. Shop owner is very strange, and asked: "is not a test tomorrow, today, how do you return home it?" Scholar said such and such a lot, shop owner laughed: "yo, I would dream and I would think You have to stay this time you think about it, the wall is not high vegetable species? wearing umbrella hats in this show that you are not prepared for it? with your cousin back by lying in bed naked, not saying you the time necessary to stand up to it? "scholar, more reasonable, so spirits to take the exam, actually in a third overall. Active people, like the sun, where it shines bright, negative people, like the moon, who started 15 different.
Inspiration: Thoughts determine our lives, what kind of idea what kind of future.
3 in a small village, under a very heavy rain, floods began to flood the village, a priest in the church to pray, he saw the flood has flooded his knee. Lifeguard drove a sampan came to church with the priest said: "Father, come on quickly! Otherwise flood will drown you!" The priest said: "No! I am confident that God will save me, you go Well, to save others. "Soon, the flood has flooded the priest's chest, and the priest had to settle for standing on the altar. At this time, there came a policeman driving a speedboat, with the priest said: "Father, come quick, or you really will be drowned!" The priest said: "No, I want to defend my church, I believe that God will save me. You'd better save others. "After a while, floods have inundated the whole church, the priest had to seize the church at the top of the cross. A helicopter flew slowly, after the pilot dropped a rope ladder cried: "Father, come quick, this is the last chance, we do not want to see you by the flood drowned!!" Father or strong-willed said: "No, I want to defend my church! God will rescue me. You'd better save others, God will be with me were in the!!" rolling flood, stubborn priest was finally Father drowned ... ... on to heaven to see God very angry after the question: "Lord, ah, I give their life, fears that serve you, why you would not save me!" God said: "I would not how to save You? the first time, I sent a sampan to rescue you, you do not, I think you are worried about sampan dangerous; the second time, I also sent a boat to go, you still do not; the second time, I am the Ambassador of the ritual until you send another helicopter to rescue you, you are still unwilling to accept the results, so I thought you anxious to come back to me, you can take with me. "
Inspiration: too many obstacles in life are all due to excessive stubbornness and ignorance caused by ignorance. In others, offer help, do not forget, only we ourselves are willing to reach out to, people can be helped to! ! !
4. Has two brothers, they lived in 80 floors. One day they travel home and found the building a power cut! Although they carrying a large bag of luggage, but it seems there is no other choice, so my brother said to his brother, we climb the stairs up! So they began to climb the stairs carrying two luggage bag. Climbed to the 20th floor when they started tired, his brother said, "bag too heavy, it is better so be it, we put bags on here, so take the elevator after the call to come and collect." So they put luggage on the 20th Floor and relaxed, continue to climb. They talked and laughed to climb, but did not last long, to the 40th floor, two very tired. Think also only half the climb, they began blaming each other, accused each other of not pay attention to the building power outage notice, only so ineffective. They climb side noisy side, so all the way to climb the 60 floor. To the 60 floor, they too tired to even fight the effort as well. Brother of the brother said, "We do not quarrel, and climbed it right." And so they quietly continue climbing stairs, and finally to the 80 floor! The brothers came to the door with excitement only to find their keys left in the 20th floor of a bag ... ...
Some people say that this story is actually a reflection of our life: 20 years old, we live his family, under the teacher's expectations, burdened with a lot of pressure, burden, and he is not mature enough, lack of capacity, so walking is inevitable instability. 20 years old, left the crowd pressure, remove the burden, began to go all out to pursue their dreams, so happily over 20 years. But the age of 40, found youth passed away, inevitably lead to a lot of regret and repent, and  began regret this, regret that, complaining about this, hate that ... ... so spent complaining about the 20 years. To the 60-year-old, life has been found running out, so told myself not to complain, to cherish the rest of the day! So quietly completed their years. To the end of life, think of themselves as if there was not anything done ... ...
original, all our dreams are to stay in the 20-year-old youth, have not had time to complete ... ...
5 people in a mountain top of Eagles Nest Lane, caught a baby eagle, baby eagle to take him home, kept in cages inside. Only with the young eagles and chickens pecking, frolic and rest. It thought it was a chicken. This eagle grew up, full-fledged, and the owner wants it to train the falcon, but because all day long and chicken mixed together, and it has become exactly the same as chicken, had no desire to fly. Owner tried various methods, all to no avail, and finally put it to the top of the hill, one will throw it out. This hawk, like stone-like, straight fall, it is hard to beat panic among the wings, so, it finally flew up!
Tip: tempering the power of a successful call
6 There are two brothers, aged four or five, as the bedroom windows are closed the whole day, they think the house is too dark, and saw the bright sunshine outside, I feel envy. Brothers to discuss said: "We can work together to come out of the sun a little sweep." Thus, the two brothers took the broom and dustpan to sweep up the sun terrace. When they moved to the room where the dustpan when there is no sunlight inside. So many times again and again to sweep the house, or that the sun did not. Mom was in the kitchen busy strange to see them move, asked: "What are you doing?" They replied: "the room is too dark, and we want to sweep the point of the sun to come." Her mother said: "As long as the windows open, the sun naturally come in, why should I scan it? "
Tip: to open the door closed, the success of failure of the sun can disperse the dark.
7 rain, a spider struggling to climbing wall has been fragmented network, due to wet the walls, it climbed to a certain height, it will fall, to climb it again and again, again and again and fall ... ... the first person to see, and he sighed to himself: "My life is not as spider it? busy and no income." So he increasingly depressed. The second person to see, he said: spider really stupid, why not look around next to a dry place to climb? I'll be as stupid as it can. So he becomes wise up. Third person to see, he was immediately spiders keep on fighting spirit moved. So he became a strong up to.
Tip: the mentality of those who are successful can be found everywhere in the power of success.
8. An old man in a high-speed train, accidentally the new shoes lost one from a window, the people around feel sorry, but, the old man threw down the second shoes immediately from the window. This move is even more surprised. Old man explained: "This shoe no matter how expensive, has no use for me, if there is who can pick up a pair of shoes, maybe he can wear it!"
Tip: winners would give up
9 great ancient philosopher Tim, one day he called his disciples were the bedside, pointing to open mouth, and then asked his disciples to see what? The presence of the public can answer the first child was on no one. So I said to them: "Teeth does not exist, but tongue is still here"
Means: the teeth to be hard but it is not long life; tongue be soft, but hardier.
10 A old monk travel with a young monk, encounter a river; see a woman was about to cross the river, but not before. Old monk will take the initiative back to the woman wading the river, and then put down women, and the young monk continued on our way. Monk can not help muttering all the way: how the master? How dare take a  woman on back across the river? All the way to think ,but not, said: Master, you violate of the provision? How a woman was on your back? Sighed the old monk: I have already put down, you still can not put down!
Inspiration: Gentlemen expansive, villains often sad; broad-minded, cheerful thought, failing to get affordable, let go, and to maintain a healthy state of mind.

The Detailed Description Using Cmd NTSD Command

The Detailed Description Using Cmd NTSD Command

forever2sky Computer skills

The usage is that open cmd and enter the following command can end the process:
Method 1: Using the PID of the end of the process
Command format: ntsd -c q -p pid
Examples: ntsd -cq -p 1332 (ending the explorer.exe process with PID 1332)
Detailed example: explorer.exe 'pid is 1332, but how to get process pid it? In the CMD, enter TASKLIST can get all the current task manager process PID (process is not all exploer.exe 1332)
Method 2: Using the end of the process name
Command format: ntsd -c q -pn ***. exe (***. exe name for the process, exe should not be spared)
Examples: ntsd -c q-pn explorer.exe
The other end of the process of DOS commands can also taskkill:
Command format: taskkill / pid 1234 / f (you can achieve the same effect.)
If the above can not satisfy your curiosity, here are:
ntsd Detailed
There are some high-level processes, tskill and taskkill might not end, then we have a more powerful tool, that is, system debug
Level ntsd. Precisely, ntsd is a system debugging tool, available only to system development-level administrators, but we kill the process or very interesting. Basically, apart from their own management processes WINDOWS system, ntsd can to kill.
Course slightly, and some level of super-rootkit Trojan, or do nothing, but fortunately this level of beef or a little horse.
ntsd debugger at boot time required to connect the user to specify a process. Use TLIST or PVIEWER, you can get an existing
Process process ID, and type ntsd -p pid to debug the process. ntsd command line using the following syntax:
ntsd [options] imagefile
Which, imagefile is the name of the image you want to debug, options are one of the following options:
Option Description -2 to open a character mode for debugging the application of the new window-d to redirect the output to the debug terminal to perform an automatic pass-g
Over the first break point in the subroutine ntsd -g to exit immediately upon termination o enabled debugging multiple processes, the default value is derived from the debugger, a
-P specifies a process to debug the process identified by the process ID-v verbose output generated
For example, suppose inetinfo.exe process ID of 104. Type the following command ntsd debugger to inetinfo process (IIS).
ntsd -p 104
You can also use ntsd start a new process for debugging. For example, ntsd notepad.exe notepad.exe will start a new process and establish a connection with it.
Once connected to a process, you can use various commands to view the stack, set breakpoints, memory dump, and so on.
Command displays all the threads of meaning - a list of KB displays the current thread's stack trace ~ * KB shows all the thread's stack trace shows the current R
U output register frame disassembled code and display the process name and the offset D [type] [] dump memory BP [#]
Set breakpoints BC [] clear one or more breakpoints BD [] disable one or more breakpoints BE [] enable one or more breakpoint BL [] lists a
Or more breakpoints
Personal opinion, there is a very important parameter is the-v argument, we can use it to find a process which articulated the following link library file.
There are many viruses, Trojan horses, or malicious software, like to make their own dynamic library, then the normal procedure of registration to the system load library list, to hide their purpose.
First we need to set ntsd output redirection, it is best to redirect to a text file, to facilitate our analysis.
c: \> set _NT_DEBUG_LOG_FILE_APPEND = c: \ pdw.txt
Note that although the output redirection, but we will still continue to display the output on the screen, and will enter into debug mode, we use the -c
q parameter, you can avoid this problem.
c: \> ntsd -c q -v notepad.exe
Now we pdw.txt file, you can see the notepad.exe file debugging information.
ntsd kill the process using the following parameters.
c: \> ntsd -c q -p PID of the process as long as you provide PID, then you can kill the process.
This address is http://www.computerites.com/computer-skills/2011/12/cmd-ntsd-commands-detailed-description-26.html

Cannot Modify Header Information

Cannot Modify Header Information

 Web design skills

If the program is running php see this warning: "Warning: Cannot modify header information - headers already sent by ...."
Few notes based on the following user posts:
There are several solutions:
1. Blank lines :
Make sure no blank line after of the calling php script.
Check is not followed by a blank line, in particular, include or require the file. Many problems caused by these blank lines.
2. Use exit statement (with the exit to solve):
Use exit after header statement seems to help some people
After the header with exit ();
header ("Location: xxx");
exit ();
3. PHP has this annoying problem, if your HTML goes before any PHP code or any header modification before redirecting to certain page, it'll said "Warning: Cannot modify header information - headers already sent by ...." Basically anytime you output to browser, the header is set and cannot be modified. So two ways to get around the problem:
3a. Use Javascript (using Javascript to solve):
Since it's a script, it won't modify the header until execution of Javascript.
Javascript can be used to replace the header. But the above code I did not execute successfully ... Also note that, using this method requires browser support Javascript.
3b. Use output buffering (use output buffering to solve):
... HTML codes ...
... PHP codes ...
header ("Location: ....");
ob_end_flush();
?>
This will save the output buffer on server and not output to browser yet, which means you can modify the header all you want until the ob_end_flush() statement. This method is cleaner than the Javascript since Javascript method assumes the browser has Javascript turn on. However, there are overhead to store output buffer on server before output, but with modern hardware I would imagine it won't be that big of deal. Javascript solution would be better if you know for sure your user has Javascript turn on on their browser.
4.set output_buffering = On in php.ini
set output_buffering = On will enable output buffering for all files. But this method may slow down your php output. The performance of this method depends on which Web server you're working with, and what kind of scripts you're using.
5. Remove bom.If you use utf-8 encoding, must be removed in the UTF-8 BOM, this is because utf-8 encoded file containing the bom, php4, 5 are not supported by the bom.
This address is http://www.computerites.com/web-design-skills/2011/12/cannot-modify-header-information-24.html